Safe checks before any scheduled run
Don't let a robot start on its own unless these things are true. A schedule runs whether or not you're watching, so you check ahead of time.
This page gives no distances, ratings or switch-on orders. Those are safety and setup rules, and they belong to your robot's maker. Follow your own robot's manual for every point below, and ask a licensed electrician about anything electrical.
The pool must be empty
Follow your manual's rule about swimmers. Don't let the robot run while anyone is in the pool.
A schedule can't see swimmers. Before the start time, decide who's responsible for clearing the pool. Tell the household and guests. Some owners keep the robot's schedule to hours when nobody swims, but that's a habit rather than a rule from the sources.
If your plans change, cancel or pause the schedule. Check your manual for how. A party, a visiting family or a child's birthday can all fill a pool without warning, and the robot won't know.
The power supply
Corded robots use a power supply, a box that steps the mains power down for the robot. Where it sits matters, and so does when you switch it on.
- Placement. Your manual says how far the box must be from the pool and where it must not sit, such as in standing water.
- Switch-on order. The order of switching on and placing the robot in the water differs between makers and models. Fluidra's app page, for example, says the robot should be powered on and connected before it goes in the water.1 Other manuals may say otherwise. Follow the order in your own manual.
The outlet
Your manual says what kind of electrical protection the outlet needs and how to test it. The terms vary by country. Wikipedia notes that RCD is an international term, while in the United States and Canada names such as GFCI are used.2 That is background only, not a rating for your robot. A licensed electrician can check your outlet. Don't wire anything yourself.
The robot and its cord
- Robot placed and started in the order your manual gives.
- Cord clear and untangled.
- Filter or basket checked and emptied, as your manual says.
- Lift the robot out only the way your manual says, including whether you may lift it by the cord.
Pool chemicals
This site doesn't cover water treatment. Never mix chemicals. Follow the label from the chemical's maker and your local health authority for anything to do with the water itself, and keep it separate from the robot's schedule. If a chemical was added recently, ask the label's maker whether swimmers or equipment should wait.
A short routine
- Look at the pool. Empty?
- Look at the power supply. Placed as the manual says?
- Look at the robot and cord.
- Check the schedule still matches your plans.
If anything's off, switch the schedule off for the day. A skipped run costs little. To learn how schedules and delays are built, read about weekly schedules and delay timers.
Reference list
- How to Schedule a Cleaning Cycle in the App, Fluidra Pool Help Center
- Residual-current device, Wikipedia