How cycle length is set: fixed times, modes and manuals
Cycle length comes from one of two places. Either the maker fixed it, or the robot lets you choose it. Your manual says which.
Fixed or chosen
Here's how the two approaches compare. Neither is better. They suit different owners.
| Fixed length | Chosen length | |
|---|---|---|
| How it works | The robot runs one set time, then stops | You pick from a list or a range |
| Example from a source | A guide for one Dolphin model says it shuts down after about 3 hours1 | One Dolphin app offers 1.5, 2 or 2.5 hours2 |
| Suits | Owners who want few decisions | Owners who want shorter or longer runs |
| Catch | Whether you can change it depends on the robot and its manual | You need to remember to set it |
Length can depend on the mode
Mode means what the robot cleans. Many robots have a floor-only setting and a floor-and-walls setting, and your manual may say whether the mode affects run time.
One Dolphin manual says its Floor Only mode focuses on the floor of the pool.2 A Water Tech page says its robots have special modes that can clean just the floor or the floor and the walls.3
The sources here don't say whether the mode changes the run time. Don't assume a mode is shorter or longer. Look in your own manual to see whether the time changes with the mode.
Scheduled runs set their own length
When you schedule a run in an app, you often choose the length at the same time.
- One maker's help page lets you set a running time of 30 to 60 minutes for a scheduled run. Its recurring option is for floor cleaning only.4
- A Fluidra help page lists "duration of each cycle" as one of the choices when you build a schedule.5
- That same page says each session has a fixed duration once you've set it.5
So a scheduled cycle and a hand-started cycle can have different lengths on the same robot. Your robot might also have a battery. Then run time is limited by charge as well. One Water Tech page says its robots offer up to 4 hours of runtime on a daily charge.3
Where to find your robot's times
Finding your own times takes a few minutes. Don't rely on a forum post or a friend's robot, since two models from the same maker can differ.
- Open the printed manual that came with the robot, or the maker's support page for your model number.
- Search it for "cycle", "run time" or "timer".
- If there's an app, look at the settings screen for the same words.
- Write the times down. You'll want them for delay timers and schedules.
Numbers on this page come from a few makers. They're examples, not a list for every robot. Your model may use different times, and its manual wins.
If the manual lists no cycle time at all, ask the maker's support team. Ask what the default run is, whether you can change it, and whether it differs by mode. Then you'll know what to expect before you pick a start time.
Reference list
- How To Operate a Maytronics Dolphin Nautilus Robotic Cleaner, INYOPools.com
- Dolphin user instructions (app section), Maytronics, copy hosted on ManualsLib
- Robotic Pool Cleaners, What You Need To Know, Water Tech
- How to Use Schedule Cleaning?, ECOVACS
- How to Schedule a Cleaning Cycle in the App, Fluidra Pool Help Center